Dynacord C1800FDi DSP 2 x 950W Power Amplifier

Power Output:

• Load Impedance: 2 Ω / 2.6 Ω / 4 Ω / 8 Ω​

• Maximum Output Power (Single Channel): 1600 W / 1300 W / 950 W / 480 W​

• Maximum Output Power (Dual Channel): 1400 W / 1200 W / 850 W / 450 W​

• Maximum Output Power (Bridged): N/A / N/A / 2800 W / 1700 W​

Direct Drive Load Capability:

• Dual Channel 70 V Operation: 2 x 1250 W (-1.5 dB)​

• Bridged 100 V Operation: 1 x 1250 W (-1.5 dB)​

Performance:

• Maximum RMS Voltage Swing (THD = 1%, 1 kHz): 65.1 V​

• Voltage Gain (Ref. 1 kHz): 32.0 dB​

• Total Harmonic Distortion (THD) at 600 W/4 Ω (MBW = 80 kHz, 1 kHz): < 0.05%​

• Intermodulation Distortion (IMD-SMPTE, 60 Hz, 7 kHz): < 0.1%​

• DIM30 (3.15 kHz, 15 kHz): < 0.05%​

• Maximum Input Level: +21 dBu​

• Crosstalk (ref. 1 kHz, at 100W/4 Ω): < -80 dB​

• Frequency Response (ref. 1 kHz): 10 Hz to 21 kHz (±1 dB)​

• Input Impedance (Active Balanced): 20 kΩ​

• Signal-to-Noise Ratio (A-weighted, ref to Max. Output Power @ 8 Ω):

  105 dB

  ​

• Output Noise (A-weighted): < -68 dBu​

Amplifier Topology:

• Output Stage: Class AB​

Power Requirements:

• Voltage: 240 V, 230 V, 120 V, or 100 V; 50 Hz to 60 Hz (factory configured)​

• Power Consumption (⅛ Maximum Output Power @ 4 Ω): 700 W​

• Mains Fuse: 240 V/230 V: T12AH; 120 V/100 V: T25AH​

Protection Features:

• Audio limiters​

• High temperature protection​

• DC detection​

• HF protection​

• Back-EMF protection​

• Peak current limiters​

• Inrush current limiters​

• Turn-on delay​

Cooling System:

• Front-to-rear airflow with 3-stage fans​

Environmental Conditions:

• Ambient Temperature Limits: +5°C to +40°C (40°F to +105°F)​

• Safety Class: I​

Physical Specifications:

• Color: Black​

• Dimensions (W x H x D): 483 mm x 88 mm x 462.4 mm​

• Weight: 15.2 kg (33.5 lb)​

Remote Control and Connectivity:

• Remote Power ON/GPIO:

  • Power remote via switch with selectable delay time​

  • Floating relay contacts (indicate protect mode)​

  • Inputs for preset selection​

• Signal Processing:

  • FIR filters​

  • Audio limiters​

  • Output and array delay​

  • 10-band user PEQ​

  • 5-band array PEQ per channel​

  • Load impedance monitoring​

• Remote Control Software: Compatible with SONICUE sound system software (requires firmware 2.0)