Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Besides low impedance operation (2 Ohms, 4 Ohms or 8 Ohms) C3600FDi can drive 100 V loudspeaker lines directly (‑1.5 dB) without output transformers. Integrated digital signal procesing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilize Class A/B resp. Class H topologies, which provide market leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For low cost of ownership a power saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision.
Dynacord C3600FDi DSP 2 x 1800W Power Amplifier
103,400 EGP
- Professional DSP amplifier for live and mobile application
- Fully integrated professional speaker processing with FIR drive technology
- Market-leading acoustic performance and rock solid reliability
- Intuitive, simplified set-up, control and operation in SONICUE sound system software with firmware 2.0
- Top Brands
- Secure Payments
- Cash On Delivery Available
Power Output:
Load Impedance: 2 Ω / 2.7 Ω / 4 Ω / 8 Ω
Maximum Output Power (Single Channel): 3200 W / 2700 W / 1800 W / 950 W
Maximum Output Power (Dual Channel): 3000 W / 2500 W / 1700 W / 900 W
Maximum Output Power (Bridged): Not applicable / Not applicable / 6000 W / 3400 W
Direct Drive Load Capability:
Dual Channel 70 V Operation: Not recommended
Dual Channel 100 V Operation: 2 x 1250 W (-1.5 dB)
Bridged 100 V Operation: Not recommended
Performance:
Maximum RMS Voltage Swing (THD = 1%, 1 kHz): 96.6 V
Voltage Gain (Ref. 1 kHz): 32.0 dB
Total Harmonic Distortion (THD) at 900 W/4 Ω (MBW = 80 kHz, 1 kHz): < 0.05%
Intermodulation Distortion (IMD-SMPTE, 60 Hz, 7 kHz): < 0.1%
DIM30 (3.15 kHz, 15 kHz): < 0.05%
Maximum Input Level: +21 dBu
Crosstalk (ref. 1 kHz, at 100W/4 Ω): < -80 dB
Frequency Response (ref. 1 kHz): 10 Hz to 21 kHz (±1 dB)
Input Impedance (Active Balanced): 20 kΩ
Signal-to-Noise Ratio (A-weighted, ref to Max. Output Power @ 8 Ω): >109 dB
Output Noise (A-weighted): < -68 dBu
Amplifier Topology:
Output Stage: Class H
Power Requirements:
Voltage: 240 V, 230 V, 120 V, or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption (⅛ Maximum Output Power @ 4 Ω): 850 W
Mains Fuse: 240 V/230 V: T15AH; 120 V/100 V: T30AH
Protection Features:
Audio limiters
High temperature protection
DC detection
HF protection
Back-EMF protection
Peak current limiters
Inrush current limiters
Turn-on delay
Cooling System:
Front-to-rear airflow with 3-stage fans
Environmental Conditions:
Ambient Temperature Limits: +5°C to +40°C (40°F to +105°F)
Safety Class: I
Physical Specifications:
Color: Black
Weight: 18.2 kg (40.1 lbs)
Remote Control and Connectivity:
Remote Power ON/GPIO:
Power remote via switch with selectable delay time
Floating relay contacts (indicate protect mode)
Inputs for preset selection
Signal Processing:
FIR filters
Audio limiters
Output and array delay
10-band user PEQ
5-band array PEQ per channel
Load impedance monitoring
Remote Control Software: Compatible with SONICUE sound system software (requires firmware 2.0)
| Weight | 18.2 kg |
|---|---|
| Dimensions | 42.2 × 48.3 × 8.8 cm |
Check Availability
Reviews
There are no reviews yet.